General Power Tool Safety Warnings - Makita BTM40 Bedienungsanleitung

Work mode: Cutting with plunge cut saw blade
Model BTM40
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BTM50
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: Cutting with segmental saw blade
Model BTM40
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BTM50
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: Scraping
Model BTM40
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BTM50
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
) : 9.5 m/s
h
2
2
) : 10.0 m/s
h
2
2
) : 5.0 m/s
h
2
2
) : 5.5 m/s
h
2
2
) : 7.5 m/s
h
2
2
) : 9.5 m/s
h
2
ENG901-1
For European countries only
EC Declaration of Conformity
We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Multi Tool
Model No./ Type: BTM40, BTM50
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
000230
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
CORDLESS MULTI TOOL
SAFETY WARNINGS
1. This power tool is intended to function for
sawing, cutting, grinding and sanding. Read all
safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
2. Hold power
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting a
"live" wire may make exposed metal parts of the
5
as the
20.10.2011
Tomoyasu Kato
Director
tool by insulated
ENH101-15
responsible
GEA010-1
GEB094-2
gripping