Herunterladen Inhalt Inhalt Diese Seite drucken

Intended Use; Type Plate; Installing The Fresh Air Cooling System; Installation Notes - Waeco CoolBreeze CB-1200-AC Einbauanleitung

Frischluft-kühlanlage
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
IA_CB-1200.book Seite 39 Montag, 18. April 2005 4:15 16
CB-1200
4

Intended use

The fresh air cooling system is intended for ventilating or cooling the
interior of caravans or camper vans with cooled air.
The fresh air cooling system is not suitable for use in agricultural or
construction vehicles!
For further information on the fresh air supply system as well as a
technical description of the construction and functions, please see the
respective chapters in the operating manual.
5

Type plate

Type plates are attached to the WAECO fresh air cooling system CB-
1200-AC or CB-1200-AC/DC. These type plates contain important device
specifications for the user and fitter.
6

Installing the fresh air cooling system

6.1

Installation notes

You should always check whether any vehicle components (e.g. lamps,
cabinets, doors etc.) could be damaged by installing the fresh air
cooling system before you start.
Prior to the installation you should find out (by consulting the vehicle
manufacturer) whether the body is designed for the static weight and
the loads of the air conditioner when the vehicle is in motion. The
manufacturer of the fresh air cooling system (WAECO) assumes no
liability whatsoever in this regard.
The vehicle manufacturer may have already provided mounts on the
vehicle for the installation of a fresh air cooling system which eliminate
the risk of weakening the construction or severing power cables.
Select a flat and sufficiently level area at the centre of the vehicle roof
for installation.
Make sure that there are no objects within the vehicle which could
obstruct the attachment of the air distribution unit or the cooled air from
flowing through the swiveling air distribution nozzles.
For safety reasons, note the location of existing cable strands, lines and
other components, in particular in those areas which are not visible, when
installing the fresh air cooling system (when drilling or screwing etc.).
Installing in rental vehicles:
Please observe the special guidelines for installations in rental vehicles
when installing the CB-WT-10 water tank.
Intended use
39

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Coolbreeze cb-1200-ac/dc

Inhaltsverzeichnis