Vermeiren Carpo 3 Gebrauchsanweisung Seite 16

NEUTRAL

Put the motor stop lever on neutral (see label). This separates the motor from the gears. You will
now be able to push the scooter.

Put the motor stop lever on drive. This will again interlock the motor and gears. You will now be
able to again drive the scooter.
Motor stop lever
L
Never put the scooter in neutral while you are driving.
L
To prevent the motor from overheating, never pick up the electronic drive before stopping the
motor/gears.
SEAT
Remove seat (Fig. C)


Pull the seat lever
 
Turn the seat a little bit and lift the seat out the adjustment bar

Release the seat lever
Locking the seat in place (Fig. C)
Do the reverse when you want to replace the seat.


Pull the seat lever
as far down as it will go.

When you hear the seat lock in place, the seat lever
pulled upward, the seat has not been locked in place yet.
Swivel seat (Fig. C)
 
Pull the seat lever
 
Turn the seat in the desired direction.

Release the seat lever

Check that the seat is firmly secured.
Depth adjustment (Fig. C)

Pull the seat depth adjustment lever


Move the seat forward or backward over the seat depth rails

To lock the seat in place, let go of the lever

Swivel the seat a little until it locks in position.

Check the seat is locked securely.
upwards.
.
up and at the same time put the seat
upwards.

, and the seat will always stop after 20°.

upwards.

Instruction manual Carpo 3 / Carpo 4

.

on the adjustment bar

must be in a horizontal position. If it is still

.

once the seat has reached the desired position.
Last updated: 2018-07
Neutral
Drive

and press
3