Troubleshooting - Chal-Tec 10007565 Anleitung

Problem:
No power
Remote Control
Does not function
No image
Projector turns off
Automatically
LCD
Input signal
Output signal
Lens
Lamp
Image
Input Power
Input Power
Working condition
Store condition
Infrared remote control
Whole products
projector
remote control
power cable
Power adapter
AV cable
Manua
lens tissue wipes
Trouble shooting
Possible Solution(s):
1. Check the power cable.
2. Do not open the projector.
3. Broken fuse.
1. Allow 5 minutes (between on and off sessions)
2. Check for defective batteries. Replace if needed.
3. Aim directly towards the IR receiver.
1. Make sure lens cap is removed.
2. Check Power cable and source.
3. Check input signal.
4. The motherboard may be broken. Replace it if needed.
1. Dirty Filter, Please rinse filter with water.
2. Due the fan. Eg: fans topped , Heat sensitive system. Replace
the fan immediately when needed.
Specification
model
native resolution
support resolution
video
audio
speaker
focus
model
power
Life
size
Brightness
Trapezoid correction
Voltage
Power consumption
Voltage
Temperature
Humidty
Temperature
Humidty
Frequency
Size
Weight
Accessories Parts
5" TFT
800 x 600
1024 x 768
Component Video (YPbPr), S-Video, VGA, HDMI,
USB, TV (optional)
Stereo
1W x 2
130mm
LED
70W
20000 Std.
50-100"
1500 Lumen
± 15°
19V ± 10%
90W
AC 110~240V/50-60Hz
0°C ~ +40°C
10% ~ 65%
-20°C ~ +60°C
10% ~ 90%
38KHz
228 x 166 x 95 mm
1,3 kg
(If all parameter changed, do not note again.)
1 unit
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc