Troubleshooting - Chal-Tec electronic.star 10005014 Anschluss- Und Anwendungshinweise

Picture menu
Sound menu
Time menu
setting
Problem:
No power
Remote Control
Does not function
No image
Projector turns off
Automatically
Picture mode
Color temperature
Aspect ratio
Noise reduction
Flip horizon
Flip vertical
Sound mode
Balance
Auto volume
Surround sound
EQ
Clock
Off time
On time
Sleep timer
OSD language
Restore factury default
Blending
OSD Duration
Software-Update (USB)
Trouble shooting
Possible Solution(s):
1. Check the power cable.
2. Broken fuse.
1. The power switch turn on or off?
2. Check for defective batteries. Replace if needed.
3. Aim directly towards the IR receiver.
1. The input source choice is correct?
2. Check input cable.
3. Check input signal.
4. Under PC mode:
The PC output frequency is 50-60Hz?
You have output your PC signal to projector?
1. The projector ventilation is block?
2. The voltage is not stable?
3. The projector is so hot? Maybe the fan is broken.
Picture menu
Standard/soft/user/Dynamic
Standard/warm/cool
4:3 or 16:9/zoom1/zoom2
Off/low/middle/high
On/off
On/off
Sound menu
Music/movie/sport/user/standard
-50~50
On/off
On/off
(120/500/1.5K/5K/10K) Hz 50
Time menu
Date--/month--/year--/hour--/mins--
Off/one time/everyday/monday~friday
Off/one time/everyday/monday~friday
Off/10 Mins/ 20 Mins/ 30 Mins/ 60 Mins/ 90 Mins
Menu setting
English/germany/chinese/...
Yes or No
Off/low/middle/high
Off/ 5 Sek./ 10 Sek./ 15 Sek.
Software update