Halm HEP Optimo L Montageanleitung Seite 18

Handling
All adjustments will be made at the front via buttons.
a) Description function key
Reduce value Increase value
If button (-) or (+) is pushed
longer than 1.5 sec fast
mode begins.
b) Description display
Symbol Specification
W
If "W" is glowing the electrical assimilated power will be displayed.
"m" shows the nominal value of the operating modes proportional or
m
constant pressure.
The measured value or nominal value will be displayed here between
0.0 to 10.0 respectively 0 to 190.
Operating mode constant pressure control
Symbol glows at active operating mode.
Operating mode proportional pressure control
Symbol glows at active operating mode.
Operating mode fixed speed
Symbol glows at active operating mode.
Operating mode external input
Symbol glows at active operating mode.
Error code. Display shows an error value of "E1-E4".
If a symbol is displayed this operating mode or function is active.
18
Store button Menu
(Change of operating mode,
switch-on background lighting)
Unit
W
m
-
-
-
-
-
-