Setting The Microwave; Cooling Fan; Memory; Saving Memory Settings - Viva VVM16H3252 Gebrauchsanleitung

Setting the microwave

Example: microwave power 600 watts, 5 minutes
Press the required microwave power setting.
1.
The indicator light above the button lights up.
Set a cooking time using the rotary selector.
2.
Press the Start button.
3.
The cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. Open the appliance door or press Stop. The
clock reappears.

Memory

You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.

Saving memory settings

Example: 360 watts, 25 minutes
Press the i button.
1.
The indicator light above the button lights up.
Press the required microwave power setting.
2.
The indicator light above the button lights up and 1:00 min
appears in the display.
Set the cooking time using the rotary selector.
3.
Confirm by pressing the
4.
The clock reappears. The setting is saved.
Note: You can save the memory settings and start the
appliance immediately. When finishing, instead of pressing
press Start.
Adding to the memory
Press the " " button.
i
The old settings appear. Save the new programme as
described in points 1 to 4.
20
i button.
Changing the cooking time
This can be done at any time. Change the cooking time using
the rotary selector.
Pausing
Press the Stop button once or open the appliance door.
Operation is suspended. The display above Start flashes. After
closing the door, press the Start button again.
Cancelling operation
Press the Stop button twice, or open the door and press the
Stop button once.
Note: You can also adjust the cooking time first and then the
microwave power setting.

Cooling fan

The appliance is equipped with a cooling fan. The fan may run
on even if the oven has been switched off.
Notes
The cooking compartment remains cold during microwave
■
operation. The cooling fan will still switch on. The fan may run
on even when microwave operation has ended.
Condensation may appear on the door window, interior walls
■
and floor. This is normal and does not adversely affect
microwave operation. Wipe away the condensation after
cooking.
Notes
You cannot save several microwave power settings one after
■
the other.
You cannot save automatic programmes.
■

Starting the memory

It is very easy to start the saved programme. Place your meal
into the appliance. Close the appliance door.
Press the " " button.
i
1.
The saved settings are displayed.
Press the Start button.
2.
The cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. Open the appliance door or press Stop. The
clock reappears.
Pausing
Press the Stop button once or open the appliance door.
Operation is suspended. The display above Start flashes. After
closing the door, press the Start button again.
Cancelling the setting
Press the Stop button twice, or open the appliance door and
press the Stop button once.
,
i