Cycle Description Chart; Baskets And Accessories - SciCan HYDRIM C51w Benutzerhandbuch

4. Instructions for Use cont'd.

4.2 Cycle Description Chart

Cycle
Description
Wash Temperature
Wash / Rinse Time
(min.)**
Dry Time
Water
Consumption
* This cycle is not a wash cycle and is not suitable for processing instruments prior to reuse.
Always run a wash cycle following the rinse and hold cycle.
** Cycle times depend on the temperature of incoming water.

4.3 Baskets and Accessories

Observe the instrument manufacturer's recommendations for cleaning and care.
When loading the unit, arrange loose instruments so that they do not touch one another.
Instruments with concave surfaces or cavities should be placed so that water
can drain freely.
The Hydrim C51w wash trolley can be configured in a number of different ways to
accommodate a wide range of instruments. On the trolley you can insert open baskets,
SysTM™ or IMS™ cassettes (maximum cassette size: 303.5 mm x 386.25 mm or 11" x
14") and the cannula post.
NOTE: Some items are not standard with the unit.
Page 6
Rinse and Hold*
Use to prevent soil
from drying on
instruments and if
wash cycle is not
immmediately
desired.
Stage 1: 35˚C / 95˚F
Stage 2: 50˚C / 122˚F
8 minutes
Not Available
6 litres / 1.59 gallons 17 litres / 4.5 gallons 17 litres / 4.5 gallons
HYDRIM C51w Operator's Manual
Regular Wash
& Dry
Use for moderately
soiled loose
instruments
50˚C / 122˚F
19 minutes
10 minutes (factory
pre-set time). Can
be extended
Heavy Duty Wash
& Dry
Use for heavily
soiled instruments
or cassettes or if
using the cannula
post.
50˚C / 122˚F
22 minutes
10 minutes (factory
pre-set time). Can
be extended.