Cleaning The Hydrim C51W; Filter And Wash Arm Maintenance - SciCan HYDRIM C51w Benutzerhandbuch

5. Maintenance cont'd.

5.4 Cleaning the Hydrim C51w

To clean all outside surfaces, use a soft cloth moistened with soap and water only.
Do not use harsh cleaning chemicals or disinfectants.

5.5 Filter and Wash Arm Maintenance

Filter Maintenance:
Inspect the coarse and fine filters daily for debris and clean if necessary.
1. Grasp the handle in the center of
the coarse filter and turn it 90˚
counter-clockwise. (To reinsert
the coarse filter, turn the handle
clockwise.)
2. Remove the coarse filter.
3. Remove the fine filter.
4. Clean both filters by rinsing them
in tap water.
5. Re-assemble. ensuring that the
coarse filter is locked in place.
Wash Arm Maintenance:
Inspect the wash arms weekly for debris and clean if necessary.
1. Open the unit door and remove the wash
rack from the unit.
2. Hold the fitting and unscrew the upper
wash arm plug.
3. Remove the upper wash arm.
4. Using two hands, grasp both ends of the
lower wash arm on the underside.
5. Pull the lower wash arm upwards.
6. Inspect both sides of the wash arms for
debris in the nozzles. Remove the debris
where necessary.
7. Rinse both wash arms with tap water.
8. Reassemble the wash arms.
HYDRIM C51w Operator's Manual
Figure 6a
mesh filter
upper wash
arm plug
Figure 6b
lower wash arm
Figure 6c
coarse filter
fine filter
upper wash arm
fitting
lower wash
arm collar
Page 13