Carmen RB7700 Gebrauchsanweisung Seite 35

• Ionic technology: antistatic and nurturing effect for shiny and smooth hair
• Cool shot function for optimal fixation of the hair
• Swivel cord
• Suitable for medium and long hair
• 2 years guaranty
> Operating instructions
The appliance is only intended for drying and styling human hair. No liability
is accepted for any damage resulting from use for other purposes, faulty
operation or amateur repairs. Guarantee services are also excluded in such
cases. The appliance is not intended for professional purposes!
Initial Use and Operation (Fig. 1 - 9)
• Preparing the hair
- Wash your hair and dry it well.
- Comb your hair thoroughly. Do not use hairspray or other flammable
chemical hair care products.
• Drying hair
Your appliance may also be used without attachments as a normal hair
dryer.
- For this, press the key e "push" and turn the top until the stop. Pull the
attachment from the appliance (see Figs. 1/2).
- To re-insert the round brush proceed in reversed sequence (see Fig. 3).
Turn the top until the stop and ensure that the markings are aligned.
• Round brushing (internal - or external curl)
WARNING!
Danger of burns from hot appliance components! Never grasp at the round
brush, especially not at the tip, when the appliance is on.
- Place the hair strands over the brush and thoroughly brush from the roots
to the tips before rolling.
- Now place the ends of the hair strands onto the brush and switch on the
appliance (see Fig. 4).
Note!
Please pay attention that the hair strands are not too thick.
- Now select the direction of rotation, whether you wish to style the curl
outwards or inwards (see Fig. 5).
- Now press the left or right side (depending on the direction of rotation
selected) of the "rocker switch" b. The round brush now starts to rotate
and turns the strands to form a curl (see Fig. 6).
- Release "rocker switch" b shortly before reaching the roots of the hair.
- Now let the warm air take effect on the strands of hair until it is dry (see
Fig. 7). To fix the curl in place, switch the "COOL" switch a and allow the
cold air to take effect.
- Now press the push button for automatic curl release f and pull the round
brush out of the curl (see Figs. 8 + 9). Switch off the appliance.
Note!
Make sure that you only use push button f to release a curl. Do not use the
automatic button to unroll the curl as this could knot your hair.
2-step sliding switch
With the 2-step sliding switch c you can switch the appliance on and select
English • 35