Cleaning The Drum - Electrolux TW SL6 E Benutzerinformation

To do the inspection:
1. Open the door. Pull the filter.
2. Move the release button on the
bottom of the door to open the heat
exchanger door.
3. Turn the blockage to unlock the heat
exchanger cover.
4. Lower the heat exchanger cover.
5. If necessary, remove the fluff from the
heat exchanger and its compartment.
You can use wet cloth and/or a
vacuum cleaner with the brush.
6. Close the heat exchanger cover.
7. Lock the blockage until it snaps.
8. Put the filter back.

11.4 Cleaning the drum

WARNING!
Disconnect the appliance
before you clean it.
Use a standard neutral soap detergent to
clean the inner surface of the drum and
drum ribs. Dry the cleaned surfaces with a
soft cloth.
CAUTION!
Do not use abrasive materials
or steel wool to clean the
drum.
ENGLISH 23