Mounting The Halogen Lamp - Sony UY-S77 Bedienungsanleitung

Mounting the Halogen Lamp

Replacing the halogen lamp
Caution
• As the temperature of a halogen lamp becomes very high, touching it may
cause burns. Do not touch it with bare hands. Turn off the power and wait
for at least 15 minutes to let the lamp cool before you change it.
• When mounting or replacing the lamp, do not apply excessive force to the
lamp or touch the lamp and reflector.
1
Open the lamp cover located on the top of the unit, and loosen two
screws.
2
Pull up the lamp holder and set it on the panel.
3
Hold the lamp holder and insert the supplied lamp.
4
Set the lamp holder in the original position, tighten two screws and
close the lamp cover.
The life of a halogen lamp is about 1,000 hours. When the supplied lamp
burns out, replace it with a new lamp (not supplied).
To replace the halogen lamp, hold the lamp holder and remove the burned-
out lamp after step 2.
Coin
Lamp holder
Match the pin with the hole
and insert.
11
(EN)