Seite 1
Aufbauanleitung / assembly instructions mod. 3885 - 3888 mit Frontauszug SW17 4,5 x 50 M8 x 25 4,5 x 30 30 x 10,5 M10 x 60 1.Montagematerial. 2. Den Oberbau umgedreht auf gepolsterten 1. Fitting material. Montageböcken ablegen. 2. Put the table-top upside down onto padded assembling trestles.
Seite 2
8. Die Klappeinlage hochstellen und dann die 2 Den Tisch wenden ohne die Füße zu belasten restlichen Zylinderkopf-Schrauben und eine und dann gleichzeitig alle 4 Tischbeine auf kurze Spax-Schraube eindrehen. dem Boden absetzen. 8. . 7. . 2 / 6 3885 - 3888 mit Frontauszug Änderungsdatum: 12.05.17...
Seite 3
Maulschlüssel die Mutter etwas lösen. 11. If needed, also adjust the opposite mount of the extenson-rod. For this purpose the nut can be loosened and after adjusting be tightened. 3 / 6 3885 - 3888 mit Frontauszug Änderungsdatum: 12.05.17...
13c. Swing out the table-extension by using the 13c: Die Klappeinlage mit dem Ledergriff aus- leather belt. Check the hight again; if klappen, die Höhe rechts erneut kontrollie- necessary adjust again. ren und wenn nötig erneut einstellen. 4 / 6 3885 - 3888 mit Frontauszug Änderungsdatum: 12.05.17...
14c. Swing in both pieces of the table-extension at the same time. Use the leather-belt to swing out the table- extension and check the hight again. If necessary, adjust again. 5 / 6 3885 - 3888 mit Frontauszug Änderungsdatum: 12.05.17...
Seite 6
15. Fertiger Tisch; nicht ausgezogen. 15. Finished table; not extended. 16. Fertiger Tisch; ausgezogen. 16. Finished table; extended. 6 / 6 3885 - 3888 mit Frontauszug Änderungsdatum: 12.05.17...