Removing/Replacing The Spacer; Cleaning And Care; Emptying The Catchment Container - Kompernass KH1919 Bedienungsanleitung

Removing/replacing the spacer

• To replace it, place the spacer
fi rmly.
• To remove it, pull the spacer
• To protect the shaver area
pliance, remove the spacer 3 and, in replacement, fi t the protective
cap on the shaver area 4. Ensure that the elevations on the inner edge
of the protective cap do not grip into the grooves on the edge of the
shaver area 4. Otherwise, the protective cap will not hold.

Cleaning and care

Emptying the catchment container

• Pull the catchment container
• Empty out the textile remains.
• Replace the catchment container
LB5new.indb Abs1:60 LB5new.indb Abs1:60
3 on the cutting head and press it
3 downwards.
4 you should, if you are not using the ap-
5 off straight to the rear.
5 so that it is seated fi rmly.
- 60 -
25.02.2010 10:21:35 Uhr 25.02.2010 10:21:35 Uhr