Fellowes Titan A3 Anleitungen Seite 7

MAINTENANCE - Easi-Access™
The Titan laminator can be opened manually by selecting the 'open' setting (
Please note: the power supply and the machine must both be ON to release the electronic safety catch.
Select the 'open' setting
( ) using the naviga-
tion buttons on the
control panel. Press 'OK'
button.
Lift the top cover with
both hands. You will
see the laminating
engine and belt-drive
mechanism.
ADJUSTABLE ENTRY GUIDE
INTEGRATED CARRY POINTS
404415_2_EUR_Titan_All_v3.0.indd 7
The ready LED will
flash and the machine
will cool down. This
may take between
30-60 minutes.
To open the belt-drive
mechanism, Pull the 2 cam
levers forwards, on each
side of the mechanism. The
upper carriage can now
be lifted upwards from the
front. Lift the carriage and
open fully until it stops in
the rest position.
The Entry Guide can be manually adjusted (especially for smaller documents) to ensure the
items are best supported when inserted and helps avoid mis-feeds.
The Titan laminator has integrated carry points for safe and easy movement of the laminator
– push in the flaps on both ends of the laminator to get to them.
) on the control panel.
When the machine has
cooled to a safe tempera-
ture, the ready LED will
stop flashing and an alert
will sound.
Take care when cleaning
any residue from the roll-
ers. Fellowes laminator
wipes (CRC# 57037) are
recommended.
To open the top cover,
move the levers on each
side of the machine
backwards to release the
electronic safety catch.
IMPORTANT:
When closing the mecha-
nism, ensure the 2 cam
levers are both pushed
forwards to lock the belt-
drive carriage correctly in
position. The lid can be
closed when the carriage
is correctly locked.
7
25/09/2009 09:21:19