Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CENTRAL LOCKING MECHANISM AND USE
1.
Open out the Aidapt Four-Wheeled Rollator frame by pulling the cross bars
outwards in opposite directions forming an inverted 'V' with the main frame (fig. 4).
2.
Ensure that your Aidapt Four-Wheeled Rollator is fully extended, and check that the
side bars are straight and level (fig. 5).
PADDED BACK
1.
To install the half round padded back first line up the ends of the tubular back with
the locating points (fig. 6 and fig. 7).
2.
Ensure that the back properly clicks and locks into position, test by lifting up onto
the padded section of the half round back seat (fig. 6).
Usage and Maintenance Instructions
Fig. 4
Fig. 6
4
Fig. 5
Fig. 7
Ver.2 08/2012 (1902)
Werbung
Inhaltsverzeichnis
