Tack life PID01A Bedienungsanleitung Seite 5

●
Pull the plug out of the socket after use, before maintenance and when changing
accessories such as saw blades, drills cutters, etc.!
●
Do not leave protruding tool keys!
●
Make sure before turning on the tool that the key or setting gauge is removed!
●
Avoid the accidental starting of the tool!
●
Never carry an electric tool connected to the power mains with your finger on the
switch!
●
Make sure that the switch is off when connecting to the mains! Extension cable
outdoors: Use only certified and duly marked extension cables outdoors!
●
Always be careful! Pay attention to your work! Proceed carefully. Do not use the
tool if you are not concentrated!
●
Check the tool for damages!
●
Before using the tool the next time check that the protection devices or slightly
damaged parts are in good working conditions! Check whether the moving parts
function correctly, that these are not jammed or whether any parts are damaged!
●
All the parts to be correctly mounted and meet all the requirements for the pro per
functioning of the electric tool!
●
Damaged protection devices and parts are to be repaired or changed by a
qualified technician provided that the operating instructions do not specify
otherwise!
●
Damaged switches are to be replaced in a customer service shop! Do not use
electric tools that cannot be switched on or off!
WARNING!
●
For your own safety always use only the accessories and attachments specified in
the operating instructions or recommended or specified by the tool manufacturer!
●
The use of accessories and attachments other than those specified in the operating
instructions can cause injuries!
●
Always have your tool be repaired by certified technicians!
●
This tool meets the relevant safety requirements!
●
Repairs are to be carried out only by qualified technicians with original spare parts
to avoid the risk of injuries to the user caused by improper repairs!
●
During operating, wear hearing protection to avoid damage to your hearing!
- 03 -