Safety Instructions - Renkforce 1629368 Bedienungsanleitung

Operating instructions
Graphic designer keyboard
Item no. 1629368
Intended use
The product is intended to be connected to a computer. The one-handed keyboard is particularly suitable
for designers and graphic works. The keyboard shortcuts and the multifunction controller facilitate and
accelerate processes and actions. The power supply between the keyboard and the computer is ensured
via USB.
The use is only permitted in enclosed spaces and, therefore, it should not be used in the open air. Contact
with moisture, e.g. in bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. In addition, improper use can cause
hazards such as a short circuit, fire or electric shock. Read the operating instructions carefully and store them
in a safe place. If you pass the product on to a third party, please hand over these operating instructions
as well.
This product complies with statutory, national and European regulations. All company and product names
included herein are trademarks of their respective owners. All rights reserved.
Delivery content
• Graphic designer keyboard
• Software CD
• USB connection cable, Type C / USB-A
TM
• Storage bag
• Operating instructions
Up-to-date operating Instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or scan the QR code shown.
Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to
an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the product.

Safety instructions

Read the operating instructions carefully and observe in particular the safety instructions.
If you do not follow the safety instructions and information on proper handling in these
operating instructions, we will assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dangerous
plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe the safety instructions and operating instructions of any other devices which
are connected to the product.
• When setting up the product, make sure that the cables are not pinched, kinked or damaged
by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
• Do not short-circuit the USB ports.
• Contact an expert when in doubt about the operation, safety or connection of the product.
• Maintenance, modifications and repairs must only be carried out by a technician or a specialist
repair centre.
• If you have any questions that are not answered in these operating instructions, please
contact our technical customer service or other professionals.
Product overview
Num key (numeric mode): Press the Num key to enter the numeric mode. The backlight of the Num key
turns on, 0-9 numeric keys are available.
Shortcut groups M1, M2, M3: Press the M1 key to enter the M1 mode; the backlight of M1 turns on. The
mode of M1, M2 and M3 can be switched freely.
Shortcut keys G1-G9: By pressing a key, actions can be performed without having to enter the complete
instructions.
USB port: The connection socket for the supplied USB connection cable to connect the keyboard to the
computer.
Multifunction controller: Press the centre of the multifunction controller for one second to activate the
user interface on the monitor.
Setup
The product has three groups (M1, M2, M3) of configurable shortcuts, each group has nine keys (G1-G9).
After setting the respective combinations, you can perform actions by pressing a key without having to enter
the complete instructions one after the other.
The multifunction controller has functions such as scrolling up and down, rotating left and right, zooming in
and out, scrolling back and forth, volume control, and brightness adjustment.
a) Driver
Connect the keyboard to the computer using a USB cable. Insert the USB Type-A plug into the appropriate
connection socket on the computer. Insert the USB Type C
on the keyboard.
Install the software from the supplied CD or download the updated software using the item no. via the link
www.conrad.com/downloads. Follow the instructions on the screen to install the software. You can now make
individual settings. Then click to save the settings as a file and import them later.
b) Operation
Standard functions: If no user-defined G1-G9
functions refer to the characters (numbers and symbols) in the second row. If you press the G1/1 key, the key
command "1" is executed; if you press the G2/2 key, the key command "2" is executed, etc. NUM mode
M1, / M2 and M3 modes can be switched freely.
Presets: The driver has preset keyboard shortcuts for various design software; you can select these in
the software menu field; for Photoshop, there is Ctrl+N (new file) keyboard shortcut under G1/1, and for
InDesign, there is Ctrl+PageDown (presets) keyboard shortcut under G7/7. The corresponding keyboard
shortcuts are displayed here. You can edit or "Delete"
software settings by clicking "Add" .
plug into the appropriate connection socket
TM
settings have been made in NUM mode
these presets; in addition, you can add new
, the standard
,