Safety Instructions - Makita 9741 Betriebsanleitung

ENGLISH

SAFETY INSTRUCTIONS

Warning! When using electric tools, basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and
personal injury, includ-ing the following.
Read all these instructions before attempting
to oper-ate this product and save these
instructions.
For safe operation:
1. Keep work area clean
Cluttered areas and benches invite injuries.
2. Consider work area environment
Don't expose power tools to rain. Don't use
power tools in damp or wet locations. Keep
work area well lit. Don't use power tools in
presence of flammable liquids or gases.
3. Guard against electric shock
Prevent body contact with grounded surfaces
(e.g. pipes, radiators, ranges, refrigerators).
4. Keep children away
Do not let visitors contact tool or extension
cord. All visitors should be kept away from
work area.
5. Store idle tools
When not in use, tools should be stored in dry,
high, or locked-up place, out of the reach of
children.
6. Don't force tool
It will do the job better and safer at the rate for
which it was intended.
7. Use right tool
Don't force small tools or attachments to do
the job of a heavy duty tool. Don't use tools for
purposes not intended; for example, don't use
circular saw for cutting tree limbs or logs.
8. Dress properly
Do not wear loose clothing or jewelry. They
can be caught in moving parts. Rubber gloves
and non-skid footwear are recommended
when working outdoors. Wear protective hair
covering to contain long hair.
9. Use safety glasses and hearing protection
Also use face or dust mask if cutting operation
is dusty.
10.Connect dust extraction equipment
If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
11.Don't abuse cord
Never carry tool by cord or yank it to discon-
nect it from receptacle. Keep cord from heat,
oil and sharp edges.
4
12.Secure work
Use clamps or a vise to hold work. It's safer
than using your hand and it frees both hands
to operate tool.
13.Don't overreach
Keep proper footing and balance at all times.
14.Maintain tools with care
Keep tools sharp and clean for better and
safer performance. Follow instructions for
lubricating and changing accessories. Inspect
tool cords periodically and, if damaged, have
repaired by authorized service facility. Inspect
extension cords periodically and replace if
damaged. Keep handles dry, clean and free
from oil and grease.
15.Disconnect tools
When not in use, before servicing, and when
changing accessories such as blades, bits
and cutters.
16.Remove adjusting keys and wrenches
Form the habit of checking to see that keys
and adjusting wrenches are removed from
tool before turning it on.
17.Avoid unintentional starting
Don't carry plugged-in tool with finger on
switch. Be sure switch is off when plugging in.
18.Outdoor use extension cords
When tool is used outdoors, use only exten-
sion cords intended for use outdoors and so
marked.
19.Stay alert
Watch what you are doing. Use common
sense. Do not operate tool when you are tired.
20.Check damaged parts
Before further use of the tool, a guard or other
part that is damaged should be carefully
checked to determine that it will operate prop-
erly and perform its intended function. Check
for alignment of mov-ing parts, binding of
moving parts, breakage of parts, mounting,
and any other conditions that may affect its
operation. A guard or other part that is dam-
aged should be properly repaired or replaced
by an authorized service center unless other-
wise indicated elsewhere in this instruction
manual. Have defective switches replaced by
and authorized service center. Do not use tool
if switch does not turn it on and off.
21.Warning
The use of any other accessory or attachment
other than recommended in this operating
instruc-tion or the catalog may present a risk
of personal injury.
22.Have your tool repaired by an expert
This electric appliance is in accordance with
the relevant safety rules. Repairing of electric
appli-ances may be carried out only by
experts other-wise it may cause considerable
danger for the user.
Save this instructions.