Klarstein GS-506P Bedienungsanleitung Seite 12

• Press the + and - keys to raise or decrease the speed. The highest speed is 4 and the lowest is 1.
• When you need instant higher speed, please press Pulse key whose speed is the same as speed
4. Pulse key will not be influenced by ON/OFF key.
• For mincing, cutting up and grinding, select inching and strong grading, for operating time, take the
principle of running for 10s and stopping for 5s, after using for 1 min, stop for 1min, then use again.
• For mixing vegetable, fruit, soy milk, select inching or strong grading , for mixing egg, select weak
grading.+
• For juicing, select inching or strong grading, for operating time, after operating for 1 min, stop for
1min, the use again, after the above operation is performed for three times, stop for 15 min, do not
operate until the motor has cooled down, in this way service life of this machine will be prolonged,
the machine will serve you more efficiently.
This machine serves the functions of juicing, meat mincing, grinding, mixing, water-ice making and
others, enriching your life. Its Design is fine, simple, and beautiful, with combined structure, easy to
operate and clean. The High speed electric motor features an internal overheating protection.
Before using:
• This machine is set with safety unit, when the handle does not fasten the cover or the cutter seat is
not fastened, the motor cannot turn, so as to ensure safety for the user.
• When disassembling or assembling the juicer, press the upper of feed port of the cover with your hand,
then force the handle to slide in or out of cover slot.
• When disassembling juicing net, first remove the cover and residue barrel, then turn the middle
ring up to 30 degrees by holding juicing nozzle with your hand, and take up, the juicing net will
automatically leave the rotor.
• When assembling, please carefully read the diagram of „names and positions of main components".
• The safety lock unit for is specially designed in order to ensure safety and reliability in use.
Juicing
• Before using, please confirm the button switch of the main machine in stop
state, in this way, in case assembly is not completed, starting the main machine
can be avoided, so unnecessary damage for persons or property avoided.
• Before juicing, first confirm juicing net and rotor clutched in position, and no
hard contact between juicing net cutter and transparent cover. Put the transparent
cover on, put the handle into the cover slot, then turn on the machine.
• For using, assemble according to the diagram of „name and position of main
components". Turn on power supply, press switch to let the machine run no-load
for 5 sec. Put prepared vegetable or fruit into feed port of the juicer, press with the pushing bar,
evenly, hard and slowly, juice of the vegetable or fruit can be found, original, fresh, good for health.
• For the juicer with large diameter, entire apple or pear can be put in for juicing, no cutting apart
needed, easy and quick. Note: when pressing food with the pushing bar, force shall be even or
indirect, pressing force shall not be more than 1 kg, no too sudden force, otherwise, juicing effect
will be reduced.
Mixing
• First check the position switch in stop state (the switch shall be in stop
position).
• Put sealing ring into cutter seat slot, screw and fasten mixing cup into cutter
seat (clockwise for fastening, and counterclockwise for loosening), put the
mixing cup cover and the feed cover on.
• Clockwise screw the cutter seat into the main machine with your hand
(counterclockwise for loosening), no holding the cup with your hand for
disassembling, otherwise, the cup will leave the cutter seat make food in the
cup leak out.
Usage
12