ULTIMATE SPEED 1188 1525 Anwendungs Und Sicherheitshinweise Seite 18

Multi-purpose car bracket
Instructions for use and safety guidelines
Intended use
Congratulations! You have chosen a high-quality
product to purchase. This product is intended as a
holder in vehicles for smartphones, mobile phones
or MP3 players. The mount is designed for the inside
windscreen pane. Use the product only for the
intended use.
Parts Description
• Vacuum suction cup
• Holding arm with ball joint and connector plate
• Holder with fixing jaw
Technical Data
• Suitable for appliances with a width of 46-74mm
• IAN:
• IU Item no.: 97373
• Model no.: 1188 1525
• Serial no.: 12/2013
Safety Guidelines
• Do not install the product within the operating
parameter of an airbag or near the steering wheel.
• The positioning of the product must not impair the
driver in any way.
• Strong sunlight can affect functioning of the
product.
• Direct sunlight can damage the suction cup and
adhesion if the temperature inside the vehicle
exceeds 70°C (158°F).
• The suction cup is suitable for attaching to a
smooth and clean surface for a limited time only.
• Do not use, install or adjust whilst driving.
• Lay all feed lines so that they pose no danger
(tripping hazard) and cannot be damaged.
• No liability is accepted for damages caused by
misuse of the product or by failure to observe the
safety guidelines.
159_LB1_DE_AT_CH_NL_GB_130913.indd 18
90585
13.09.13 08:3