Cocraft 18-3600 Bedienungsanleitung Seite 6

Assembly instructions
1
4
1. Make sure that the vacuum is unplugged from the mains.
2. Open the latch.
3. Lift up the motor unit and remove the accessories from the container.
4. Check that all the parts are intact and that nothing is missing.
5. Press the castors in securely into the underside of the container.
6. Place the handle into position and fasten it with two supplied retaining screws.
Operating instructions
Note:
The cloth dust filter and dust bag must be used for dry vacuuming. The cloth dust filter
and dust bag must first be removed and the foam filter fitted, before beginning any
type of wet vacuuming.
2
5
6
3
6