Step 6
A) Connect Computer Wire (42) with Middle Computer Wire (58).
B) Slide the Computer (10) to the Front Post (2) then fasten by x4 Screw of Computer (41).
Recheck all bolts and nuts are tightened securely
before using the machine.
Step 7
A) Fix the Fixed Handlebar (3) to the Front Post (2)
with x 2 Screw (46) and Curve washer (64).
B) Insert Upper Handlebar (L & R) in the Lower Hand
Rail which marked "L" or "R" accordingly. Then fasten
by x 2 Allen Bolt (70) and x2 Carriage Bolt (69)
respectively.
C) Insert the Hand Pulse Wire (63) to the back of
computer.