Chal-Tec Klarfit 10009110 Bedienungsanleitung Seite 19

Step 1
A) Attach the Front Stabilizer (5)
to the main frame (1) fasten
and secure carriage bolts (78)
with Curve washer (64) and
Domed nut M8 (65).
B) Attach the Rear Stabilizer (4)
to the main frame (1) fasten and
secure carriage bolts (78) with
Curve washer (64) and Domed
nut M8 (65).
ASSEMBLY
Step 2
A) Take the Front post (2) and connect the
Middle Computer wire (58) with Lower
computer Wire (59).
B) Resistance cable assembly. Turn the
resistance knob on the Front Post (2) to Level 8.
Now insert the end (lug) of Cable (32) into the
lower tension cable (34) bracket hook. Pull the
Tension Cable (32) and slide through cut out
section of the lower cable (34) bracket, cable 32
will now insert into the lower cable bracket (34).
C) Insert Front Post (2) into Main Frame (1) and
finger tighten with x 4 Curve Washer2 (64) and x4 4
Allen Bolt (66).
Note: Please turn the resistance tension to level
8 before assembly.