DAB AQUATWIN TOP 132 Installationsanweisung Und Wartung Seite 41

EV1
Connecting terminals for supplying the three-way valve (EV2)
15 – 16 –
Electrical characteristics: 230V AC 1A outlet protected by fuses
17
EV1
Connecting terminals for indicating status of three-way solenoid valve (EV2)
18 – 19 –
Electrical characteristics: 24V AC 10mA, max. impedance 55kOhm
20
EV1
Connecting terminals for overflow control float in drinking water storage tank
21 – 22
Electrical characteristics: 24V AC 10mA, max. impedance 55kOhm
(G5)
Connecting terminals for supplying EV3 to top up water storage from the mains
23 – 24
Electrical characteristics: 24V AC 1A, outlet protected by fuses
Spare terminals (not enabled)
25 – 26
Disabled fuse
FU1
Fuses protecting the electronic board transformer against short circuiting of the primary circuit
FU2
and of its supply line.
Electrical characteristics: 5x20T 100mA
Fuses protecting the transformer against incorrect connection of the motor cables (check the
FU3
thermal protection). FUNCTION NOT USED
Fuse protecting the electropump P1 against short circuiting.
FU4
Electrical characteristics: 10x38 16A (aM)
Switch off power before performing maintenance.
Fuses protecting the electropump P2 against short circuiting.
FU5
Electrical characteristics: 10x38 16A (aM)
Switch off power before performing maintenance.
Fuse protecting the transformer against short circuiting of the primary circuit and of its supply
FU6
line.
Electrical characteristics: 10.3x38 1A tipo (gG)
Fuse protecting the transformer against short circuiting of the secondary circuit and of the low
FU7
voltage auxiliary circuit line.
Electrical characteristics: 10.3x38 1A tipo (gG)
ENGLISH
H1 G1 G2 G3 G4 EV1 EV2
39
EV
G5