Technical Information; Technical Data; Environment Concerns - Zanussi ZBF22451SA Benutzerinformation

50 mm
90°
21 mm
21 mm
50 mm
16. Open the appliance door and the kitchen
furniture door at an angle of 90°.
17. Insert the small square (Hb) into guide (Ha).
18. Put together the appliance door and the
furniture door and mark the holes.
19. Place the small square on the guide again
and fix it with the screws supplied.
20. Align the kitchen furniture door and the
appliance door by adjusting the part Hb.
8 mm
Hb
Ha

Technical information

Technical data

Height
Width
Depth
Rising time
Voltage
Frequency
The technical information are situated in the
rating plate, on the external or internal side of
the appliance and in the energy label.

ENVIRONMENT CONCERNS

Recycle the materials with the symbol
the packaging in applicable containers to
recycle it. Help protect the environment and
26
Ha
Hc
Hb
. Put
21. Press the part (Hd) on the part (Hb).
Hb
Hd
Do a final check to make sure that:
• All screws are tightened.
• The magnetic sealing strip is attached tightly
to the cabinet.
If the ambient temperature is low (for
example, in the Winter), the size of
the gasket decreases. The size of
the gasket increases when the
ambient temperature increases.
mm
mm
mm
Hours
Volts
Hz
human health and to recycle waste of electrical
and electronic appliances. Do not dispose
appliances marked with the symbol
1780
560
550
24
230 - 240
50
with the
www.zanussi.com