AFRISO VarioFox 24 Betriebsanleitung Seite 110

7.7 Factory setting
This function is used to reset the product to the factory settings.
7.7.1 Saving the settings and restoring the factory settings
Fig. 23: Example: Parameter backup
Save parameter
This function is used to save all settings to the EEPROM.
Set
This function restores the factory settings and overwrites all settings with
the exception of the characteristics.
Last condition
This function restores the parameter settings saved to the EEPROM.
7.8 Limit value
7.8.1 Adjusting the limit values
This function is used to adjust the limit values.
Mode of action
This function is used to specify the type of switching of the relay when a
limit value is reached.
Parameterisation
VarioFox® 24
EN
47