AFRISO VarioFox 24 Betriebsanleitung Seite 104

Access to the memory card and the USB connection is provided at the
bottom of the display PCB. At the top of the display PCB, the positions for
access to the "SD-CARD" (B) and the mini USB port (A) are marked.
A connection marked "AD-UART" is also located on the display PCB; this
connection is reserved for programming by the manufacturer.
3. Insert the memory card with top view of the memory card contacts
inside the marks into the card holder.
4. Refit the upper part of the housing.
5. Screw the upper part of the bottom part of the housing by means of the
4 plastic screws.
6. Reapply mains voltage.
The product checks the inserted memory card for available memory
space and write protection. This can take several seconds, depending on
the memory size.
• Indication of the available memory space in percent.
• Indication of write protection, if activated.
Parameterisation
A
B
VarioFox® 24
EN
41