Coati 12600 Bedienungsanweisung Seite 11

2º manual 12600.qxd 30/11/00 17:46
(GB) DIGITAL ELECTRONIC CHRONOTHERMOSTAT
TABLE OF CONTENTS
1. INTRODUCTION
2. INSTALLATION
3. PROGRAMMING TIME AND DATES
4. REGULATING CRONOTHERMOSTAT
5. REGULATING PROGRAMS
6. OPERATING MANUALLY
7. TECHNICAL FEATURES
Página 20
20
1. INTRODUCTION
This cronothermostat has been designed for use with fixed oil, gas, or electric heating systems,
and may be used in place of most indoor home thermostats.
2. INSTALLATION
WARNING
The thermostat should be installed only in dry, indoor areas, in fixed heating systems,
and on nonconductive surfaces.
To avoid electrical discharges, always disconnect the heating system from the main
electrical line from the master switch in the house. Carefully read the following
instructions before installing the thermostat.
Where to Install Thermostat
The ideal location for your thermostat is a spot approximately 1'5 meters from the floor, in a well
ventilated area, and far from:
1. Indoor drafts
2. Heat sources
21