Elesa DD52R-E-RF Betriebsanleitung Seite 27

DD52R-E-RF
Parameter
_ _ _ 0 _ _
_ _ 0 _ _ _
0 _ _ _ _ 0
Models all rights reserved in accordance with the law.
Always mention the source when reproducing our drawings.
Description
Key function
Key function
Key
combination
function
+
Electronic position indicators
Data transmission via radio frequency
Available options
ArCLr : switching from ABS
to REL the counter is set
to zero.
Ar : switching from ABS to
REL the counter is not set
to zero.
OFF : the key is not assigned
to any function in the operating
mode.
d_tArG : during the
positioning press the key
on the display will appear the
target position to reach.
d_toG0 : during the
positioning press the key
on the display will appear the
distance to reach the target
position.
OFF : the key is not assigned
to any function in the operating
mode.
The key combination activates
the direct programming of the
following parameters:
P_OrG : parameter OrG
P_StP : parameter StEP
P_OFS : parameter OFFS
OFF : the key combination is not
assigned to any function in the
operating mode.
Standard
value
ArCLr
OFF
P_OrG
EN
27