Elesa DD52R-E-RF Betriebsanleitung Seite 24

DD52R-E-RF
8.1 Programming parameters with numeric values
Press the key
Press the key
Press the key
Press the key
8.2 Programming parameters
Press the key
Enter the password 22011 (only if PASS = On )
Press the key
EN
24
to increase the flashing digit.
to decrease the flashing digit.
to select the next digit.
to confirm the value and go back to the list of parameters.
The numeric values of the parameters must be inserted
taking into account the selected unit of measure.
for 3 seconds
to scroll through the list of parameters
Electronic position indicators
Data transmission via radio frequency
Models all rights reserved in accordance with the law.
Always mention the source when reproducing our drawings.