Endress+Hauser Prowirl 73 Einbauanleitung Seite 2

Installing sensor parts
Order No Device component
Kit connection board 92F FS electronic Ex
71026991 1 × connection board L55 FS
1 × cable tree complete 92F Prosonic F FS
Kit connection board 92F FS sensor Ex, .
71026992
1 × connection board L55 FS
Kit gaskets 77, 72, 73 HD
71034586 5 × Dichtungsscheibe 25.0/20 × 1.0 mm
(1.0/0.79 × 0.04 inch) Sigraflex HD
!
Note!
• The order number of the spare part set (on the packaging label) can differ from the product-number (on the label directly on the spare part)!
• The order number of the relevant spare part set can be found by entering the product-number of the spare part in the spare parts finder.
• We recommend that the Installation Instructions be kept with the packaging at all times.
Confirmation whether the spare part is permitted to be used with the measuring device
The spare parts set and Installation Instructions are used to replace a faulty unit with a functioning unit of the same type. 
Use genuine parts from Endress+Hauser only.
Only original spare parts supplied by Endress+Hauser shall be used with the measuring device. Therefore, before use, check whether the spare
part set is compatible with the measuring device.
A spare parts overview label is located in the connection compartment cover of the measuring device. If there is no label or the spare part is not
listed the appropriate spare part can also be identified via W@M Device Viewer.
How carrying out such a check via the W@M Device Viewer is described below:
i
Choose the Endress+Hauser Device Viewer via web browser: www.endress.com/deviceviewer
Enter the serial number (Ser. No.) of the device into the W@M Device Viewer (on the label of the transmitter), then click on "Spare parts".
The list of the available spare parts for the device is displayed.
Check the order number on the packaging label of the spare part set.
Check whether the order number of the spare part set is specified in the list displayed by the device viewer:
= YES, the spare part can be used.
= NO, the spare part may not be used.
If you have any questions, contact your Endress+Hauser service organization.
2
Ser. No.:12345
Ser.No.:1234567890
i
www.endress.com/deviceviewer
Order No Device component
Kit 20 gaskets Prowirl 77, 72, 73
71034588
20 × gasket 25/20 × 1 mm (1.0/0.79 × 0.04 inch) Sigraflex Z
Kit DSC-sensor PW 73 high pressure 3.1
1 × sensor PW73 complete HP, 4 × screw M8 × 20, 3.1
71117952 1 × gasket 25.0/20 × 1.0 mm (1.0/0.79 × 0.04 inch) Sigraflex HD
1 × gasket 25.0/20 × 1.0 mm (1.0/0.79 × 0.04 inch) Viton
1 × gasket 25.0/20 × 0.8 mm (1.0/0.79 × 0.03 inch) Gylon
Device Viewer
Ser. No.: 12345
=
?
A0016264
Endress + Hauser