Conrad Electronic GX106 Bedienungsanleitung Seite 41

Example:
You call the output 3 „LAMP", because a garden lamp is connected to it.
When you now send the SMS or e-mail LIGHT =1, the output SMS3 is
switched on. The SMS LIGHT =0 turns the output SMS3 off again.
Note:
The text must always contain 8 characters. If the entered text is shorter,
you have to enter blanks (marked with stars here: LIGHT***=1).
If you click on „Sent by anyone", anyone sending this text as SMS or e-
mail can activate/deactivate the output. Or you select the receivers from
your list in SMS and e-mail that may switch this output.
means that anyone who knows and
„Always switch with password"
sends the password can switch this output. E.g. if your password is
SECRET, anyone sending the SMS SECRET LIGHT =1 (with the
respective blanks SECRET**LIGHT***=1) can activate the output.
The module can return an automatically generated response to
make sure that the output was switched. The response is sent to the
sender address.
4 TEMPERATURE OUTPUTS
see T1/T2 input
1 CALL OUTPUT (INCALL)
This is the INCALL output, which switches for a defined time as soon as
the module is called. Because the module does not pick up, this is free
of charge! You simply call the module and let it ring a few times to be
sure. Then the INCALL output switches on for the set time and then off
again automatically. This is ideal e.g. for a garage door opener or front
door light.
The activation time can be set in 12 stages from 0.3 seconds to 24
hours.
With „Anyone may call", this output switches on every call, regardless
of whether this is contained in the telephone list; it even switches if no
phone number is transmitted. But you can also select the phone num-
bers in your list in TEL that may switch this output. A relay is already con-
nected to the output INCALL.
41