Herunterladen Inhalt Inhalt Diese Seite drucken

Optional Accessories; Installation; General Installation Notes - Morningstar EcoBoost MPPT Bedienerhandbuch

Solar charging system controller
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2.3 Optional Accessories

The following accessories are available for purchase
separately from your authorized Morningstar dealer:
Remote Temperature Sensor (Model: RTS)
The RTS measures battery temperature for accurate
temperature compensation and is recommended when
the ambient battery temperature differs from the ambient
controller temperature by more than 5º C. The standard
cable length is 33 ft (10m).
N OTE: The use of a Remote Temperature Sensor is
strongly recommended. Controller location, air flow, and
system power can drastically affect the local temperature sensor
reading. An RTS will provide optimal charg ing performance.
Ground-fault Protection Device (GFPD-150V)
As a safety measure, the GFPD-150V detects power source
ground faults and interrupts current.
8
General Information
3.0

INSTALLATION

3.1 General Installation Notes

• Read through the entire installation section first before
beginning installation.
• Be very careful when working with batteries. Wear
eye protection. Have fresh water available to wash
and clean any contact with battery acid.
• Use insulated tools and avoid placing metal objects
near the batteries.
WARNING: Equipment Damage or Risk of
Explosion
Never install the EcoBoost MPPT in an enclosure
with vented/flooded batteries. Battery fumes
are flammable and will corrode and destroy the
EcoBoost MPPT circuits.
CAUTION: Equipment Damage
!
When installing the EcoBoost MPPT in an
enclosure, ensure sufficient ventilation. Installation
in a sealed enclosure will lead to over-heating and
a decreased product lifetime.
WARNING: Equipment Damage
The EcoBoost MPPT is designed for negative
or floating ground systems ONLY, and is NOT
approved for use in a positive ground system.
Damage to USB connected devices may result.
WARNING: Equipment Damage
DO NOT connect a laptop PC to the USB data
port while the laptop is connected to an AC
charger. Damage to the USB port may result.
EcoBoost MPPT Operator's Manual
9

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis