Important Safety Instructions; Safety Information - Morningstar EcoBoost MPPT Bedienerhandbuch

5.0 Troubleshooting...........................................35
5.1 LED Fault Indications...................................................35
5.2 Battery Charging and Performance Issues.................39
6.0 Warranty .................................................... 40
7.0 Technical Specifications............................... 41
8.0 Certifications...............................................44
iv
1.0
..
...Continued
SAVE THESE INSTRUCTIONS.
This manual contains important safety, installation, operating
and maintenance instructions for the EcoBoost MPPT solar
controller.
The following symbols are used throughout this manual to
indicate potentially dangerous conditions or mark important
safety instructions:

Safety Information

• Read all of the instructions and cautions in the manual
• There are no user serviceable parts inside the
ELECTRICALLY ISOLATED FROM DC INPUT, AND MAY BE
ENERGIZED WITH HAZARDOUS SOLAR VOLTAGE. UNDER
CERTAIN FAULT CONDITIONS, BATTERY COULD BECOME
OVER-CHARGED. TEST BETWEEN ALL TERMINALS AND
GROUND BEFORE TOUCHING.
ISOLATOR IS REQUIRED IF IT IS TO BE CONNECTED TO A DVC
A CIRCUIT.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Indicates a potentially dangerous condition.
Use extreme caution when performing this task.
CAUTION: Indicates a critical procedure for safe and
proper operation of the controller.
NOTE: Indicates a procedure or function that is important
to the safe and proper operation of the controller.
before beginning installation.
EcoBoost MPPT. Do not disassemble or attempt to repair
the controller.
WARNING: Risk Of Electrical Shock.
NO POWER OR ACCESSORY TERMINALS ARE
WARNING: THE COMMUNICATIONS PORT IS
CONSIDERED TO BE DVC B. AN EXTERNAL
EcoBoost MPPT Operator's Manual 1