Safety; General Remarks; Notes On Signs And Symbols - Kemper MaxiFil Betriebsanleitung (Origina

2 Safety

2.1 General Remarks

The MaxiFil has been developed and constructed in accordance with the latest state
of technology and generally acknowledged safety rules. When operating the MaxiFil,
hazards to the operator or damage to the MaxiFil and other property may arise if it:
− is not operated by trained or instructed personnel
− is not used for the purpose intended and/or
− is not properly maintained.

2.2 Notes on Signs and Symbols

DANGERG
This is a warning of an imminent danger situation with an inevitable
consequence of severe injury or death if the specified instruction is not
followed exactly.
WARNING
Draws attention to a potentially dangerous situation that could result in
severe personal injury or death if the specified instruction is not
followed exactly.
CAUTION
This is a warning of a potentially dangerous situation with the result
of moderate or minor injuries and property damage if the specified
instruction is not followed exactly.
NOTE
This is an indication of useful information for safe and proper handling.
• The bullet point marks work and/or operating steps in a sequence.
The steps are to be carried out in this order from top to bottom.
− The dash marks lists.
Art.-Nr.: 150 2489
Technical changes and errors excepted.
KEMPER MaxiFil Operating Instructions - EN
- 39 - Rev.: 01
Latest update: 06/2015