Cleaning And Care - Klarstein 10032549 Bedienungsanleitung

EN
40

CLEANING AND CARE

WARNING
Danger of burns. All cleaning and maintenance must be carried out
when the grill is cold and the gas supply to the gas cylinder has been
shut off.
Cleaning:
Burn the grill for about 15 minutes after each use. This reduces the amount of food
remaining.
Outer surfaces:
Use a mild detergent or a baking soda solution. Non-abrasive scourers may be used to
remove stubborn stains. If the paint on the inside of the grill looks like it is peeling off, it is
actually charred grease that is peeling off. Clean with a strong soap solution. Then rinse
with water and let dry completely.
Grill surface:
Remove any residue with a brush, scraper or cleaning pad with a soap solution. Rinse
with water and allow to dry.
Wood surfaces:
Wash with a soft cloth and soapy water. Rinse off with water. Do not use abrasive
cleaners, grease-dissolving cleaners or detergent concentrates for wooden surfaces of
the grill.
Grill grate:
Use a mild soapy solution. A non-abrasive scourer may be used for stubborn stains.
Cleaning the burner unit
WARNING
Danger of burns. All cleaning and maintenance must be carried out
when the grill is cold and the gas supply to the gas cylinder has been
shut off.
1. Turn the gas supply on the control dial off and disconnect the connection to the gas
cylinder.
2. Remove the cooled grate.
3. Clean the burners with a soft brush or blow them clean with compressed air.
4. Clean the clogged parts with a pipe brush and stiff wire.
5. Check the burner for damage (cracks or holes). If damage has been found, replace
with a new burner. Make sure that the gas valve openings are correctly positioned.