2 Vorarbeiten
2.1 Türdichtungsrahmen ausbauen
-
Schrauben (8 Stück) des Türdichtungsrahmens vom Schal-
ter abschrauben
Fig. 3
2.2 Bedienpult ausbauen
Fig. 4/4a
-
Linsenschrauben mit Kreuzschlitz M4x8 (1.2) und
Sicherungsscheiben (1.3) des Bedienpultes (1) abschrau-
ben
-
Bedienpult abnehmen
1.2, 1.3
2 Preliminary work
2.1 Removing the door sealing frame
-
Remove the 8 screws for the door sealing frame
2.2 Removing the control panel
-
Remove Phillips-head screws M4x8 (1.2) and lock washers
(1.3) of control panel (1)
-
Remove control panel
1.2, 1.3 1
3