Limited Guarantee - Chicago Pneumatic CP3109-19 Bedienungsanleitung

DISASSEMBLY AND REASSEMBLY
INSTRUCTIONS
Disconnect the machine from the
compressed air supply.
Remove all accessories.
CP3119-12EL, CP3119-12EXL
● Unscrew the front housing (45) and the
intermediate housing (43).
● Disassembling the collet spindle assembly
(see figure 2).
● Unscrew the plug (52) before extracting the
spindle, being careful with the needles.
Disassembling the turbine
● Remove the turbine from its housing (15),
and pull out the lock ring (28 or 31).
● Unscrew the speed governor (17) or the
screw (16).
Left thread (see figure 3).
● Disassemble the turbine (see figure 4).
● CLAMP THE ROTOR SLIGHTLY IN A VICE
FITTED WITH LEAD JAWS, then unscrew
the coupling fork (41) or the collet holder
(37).
Reassembling the turbine
● Proceed in reverse order with respect to
disassembly.
Be careful with the direction for
assembling the blades.
● Apply a small quantity of "LOCTITE 243" on
the thread of the governor (17) or screw (16)
before tightening the governor to a torque of
2 N.m.
● Make sure that the turbine is correctly
positioned (see figure 5).
CP3119-12EL, CP3119-12EXL
Reassembling the complete collet holder:
● Proceed in the reverse order with respect to
disassembly.
● Grease the collet holder (49) before
positioning the needles.
1
06/2010

LIMITED GUARANTEE

1. This Chicago Pneumatic product is
guaranteed against defective workmanship
or materials, for a maximum period of 12
months following the date of purchase from
Chicago Pneumatic or its agents, provided
that its usage is limited to single shift
operation throughout that period. If the usage
rate exceeds that of single shift operation,
the guarantee period shall be reduced on a
prorata basis.
2. If, during the guarantee period, the product
appears to be defective in workmanship or
materials, it should be returned to Chicago
Pneumatic or its agents, together with a short
description of the alleged defect. Chicago
Pneumatic shall, at its sole discretion,
arrange to repair or replace free of charge
such items as are deemed faulty by reason of
defective workmanship or materials.
3. This guarantee ceases to apply to products
which have been abused, misused or
modified, or which have been repaired using
other than genuine Chicago Pneumatic spare
parts or by someone other than Chicago
Pneumatic or its authorized service agents.
4. Should Chicago Pneumatic incur any
expense correcting a defect resulting from
abuse, misuse, accidental damage or
unauthorized modification, they will require
that such expense shall be defrayed in full.
5. Chicago Pneumatic accepts no claim for
labour or other expenditure made upon
defective products.
6. Any direct, incidental or consequential
damages whatsoever arising from any defect
are expressly excluded.
7. This guarantee is given in lieu of all other
guarantees, or conditions, expressed or
implied, as to the quality, merchantability or
fitness for any particular purpose.
8. No one, whether an agent, servant or
employee of Chicago Pneumatic, is
authorized to add to or modify the terms of
this limited guarantee in any way.
2 3
2050541043
Issue no: 03
Series: C
4 5
5 / 29