Herunterladen Diese Seite drucken
CVMA-WMIP
für vandalismussichere Dome- Kameras und IP-Module
Wandhalterung, Montageanleitung
NL
CVMA-WMIP
Vandal Dome Camera, Indoor Dome Camera, Analog Indoor
Dome and Analog Vandal Dome Camera
Wall Mount Kit, Mounting instruction
VORSICHT
Um die Gefahr eines Elektroschocks zu vermeiden,
Gehäuse nicht, öffnen!
VORSICHT
Schützen Sie das Gerät vor Nässe und Feuchtigkeit, um
die Brandgefahr oder die Gefahr eines Elektroschocks zu
vermeiden.
_________________
Diese Montageanleitung ist nur für Installateure gedacht, die über
ausreichende Kenntnisse in Bezug auf Videosysteme verfügen.
Servicearbeiten dürfen nur von qualifiziertem Personal ausgeführt
werden.
CAUTION
das
To avoid electrical shock, do not open the cabinet.
CAUTION
To reduce the risk of fire or electrical shock, do not expose
this product to rain or moisture.
______________________________________________________
This quick start guide is only intended for use by installers who have an
adequate working knowledge of video systems.
Refer servicing to qualified personnel only.
DE
EN
NL
loading

Inhaltszusammenfassung für Vanderbilt CVMA-WMIP

  • Seite 1 CVMA-WMIP für vandalismussichere Dome- Kameras und IP-Module Wandhalterung, Montageanleitung CVMA-WMIP Vandal Dome Camera, Indoor Dome Camera, Analog Indoor Dome and Analog Vandal Dome Camera Wall Mount Kit, Mounting instruction VORSICHT CAUTION Um die Gefahr eines Elektroschocks zu vermeiden, To avoid electrical shock, do not open the cabinet.
  • Seite 2 CVMA-WMIP – Montageanleitung – Mounting instruction Work safety information Allgemeine Sicherheitshinweise Betreiben oder lagern Sie das Produkt nicht: Do not operate or store the unit:  an extrem warmen oder kalten Orten.  In extremely hot or cold places.  in der Nähe von starken Magnetquellen.
  • Seite 3 CVMA-WMIP – Montageanleitung – Mounting instruction Installing the camera Montage der Kamera Installing the Vandal dome camera Montage des IP-Moduls für vandalismussichere Dome-Kamera 1. Attach the dome base (6) to the wall mount using to the two 1. Befestigen Sie das IP-Modul (6) mittels der beiden mechanischen mechanical screws (M4 x 15mm) (7) (Fig.
  • Seite 4 CVMA-WMIP – Montageanleitung – Mounting instruction © Vanderbilt 2016 Issued by Vanderbilt Data and design subject to change without notice Clonshaugh Business and Technology Park Supply subject to availability Clonshaugh Document no.: C-300864 Dublin 17 Ireland Document version: 2.0 www.vanderbiltindustries.com...