Switching Off; Temperature Regulation - Electrolux IK3035CZR Benutzerinformation

6 www.electrolux.com
Mode
5
It is possible to change predefined sound
of buttons by pressing together Mode and
3.2 Display
A
Off
min
3.3 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off. The temperature
indicators show the set default
temperature.
To select a different set temperature refer
to "Temperature regulation".
If "dEMo" appears on the display, refer to
"Troubleshooting" .

3.4 Switching off

1. Press the appliance ON/OFF for 5
seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.

3.5 Temperature regulation

Set the temperature of the appliance by
pressing the temperature regulators.
Default set temperature:
• +5°C for the fridge
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
B C D
H G F
ON/OFF
6
temperature colder button for a few
seconds. Change is reversible.
A. Timer indicator
E
B. ON/OFF indicator
C. FastCool function
D. NaturaFresh function
E. Temperature indicator
F. Alarm indicator
G. ChildLock function
H. DrinksChill function
3.6 FastCool function
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the FastCool function to chill the products
more rapidly and to avoid warming the
other food which is already in the
refrigerator.
1. Press the Mode until the
corresponding icon appears.
The FastCool indicator flashes.
2. Press the OK to confirm.
The FastCool indicator is shown.
The FastCool function shuts off
automatically after approximately 6 hours.
To switch off the function before its
automatic end, repeat the procedure.
3.7 NaturaFresh compartment
setting
1. Press Mode until the corresponding
icon appears.
The display shows 3. This is the default
setting that ensures the most effective
performance.
2. Press the temperature buttons on the
control panel to select necessary
setting.
3. Press OK to confirm the setting.
The function switches off by
selecting a different fridge set
temperature.