Buttonhole Stitch - AEG 63Z Bedienungsanleitung

Manual for Model 63Z

Buttonhole stitch

Buttonholes can be adapted to the size of the button.
For stretch fabric or thin fabric, it is recommended to use a stabilizer for a better buttonhole
finish.
20
21
22
0.3~1.0 2.5~7.0
0.3~1.0 2.5~5.5
0.3~1.0 5.5~7.0
1
20: For thin or medium fabric
21: For thin or medium fabric
22: For suits or overcoats
Please Note:
Before sewing a buttonhole on your
project, practice on a scrap piece of the
same type of fabric.
Mark the positions of the buttonhole on
the fabric.
The maximum buttonhole length is 3cm (1
3/16 inch). (Total of diameter + thickness of
button.)
Attach the buttonhole foot, then pull out the
button holder plate and insert the button.
The size of the buttonhole is determined by
the button inserted in the button plate.
The thread should be passed through the
hole in the presser foot, then be placed under
the foot.
Select the buttonhole stitch.
Adjust the stitch width and the stitch
length to the desired width and density.
Position the fabric under the presser
foot with the front end of the buttonhole
mark aligned with the center line on the
buttonhole foot.
1 Starting point
42