Install The Illuminator Kit (Inverted Installation) - Axis Q8685-E PTZ Sicherheitsinformationen

AXIS Q8685-E PTZ Network Camera
1
Connector from the illuminator (x2)
2
Connector from the positioning unit (x2)
6. Connect the cables. See Connectors on page 47.
7. Attach the illuminator bracket to the positioning unit using the four screws (T20, torque
3.0 Nm).
Note
For more information on operating the illuminators, see the illuminator LED manual
(check model on product label) and the User Manual of your compatible Axis product at
www.axis.com

Install the illuminator kit (inverted installation)

WARNING
• Risk of electric shock. Make sure the power supply is disconnected.
38