First use or after a long period of disuse
1
Fill the tank with fresh,
still water.
3
The buttons (espresso, long co ee and lter
co ee) and the multifunction indicator light
blink at the same time.
5
Press one of the co ee buttons (espresso,
long co ee or lter co ee). Wait for the
machine to complete the priming cycle and ll
with water. The multifunction indicator light
switches o .
NOTE:
If the co ee buttons and the multifunction indicator light continue to blink
after the lling procedure has ended, repeat the steps in point 5.
2
Plug in the appliance and turn it on.
4
Place a large container under the dispensing
spout.
6
The buttons (espresso, long co ee and lter
co ee) blink at the same time; the machine is
warming up.
1
27