Features And Settings - Winix HR1000 Bedienungs- Und Wartungsanleitung

MANUAL MODE, TIMER AND PLASMAWAVE®
Every time the Mode button is pressed, the Mode LED light will cycle through the
settings.
(Auto, Sleep, Low, Medium, High, Turbo)
3. Manual Mode (setting fan speed)
Users can opt to manually set the fan speed to Low, Medium, High, or Turbo.
Press the Mode button to select
①
the desired fan speed.
x The mode LED light will indicate the selected
fan speed, and operation will begin.
▶ When Manual Mode is in use, Auto and Sleep modes are
4. Timer
The timer can be set for when you want the unit to run for a specified period of time.
Select the desired period by pressing
①
the Timer button.
x The Timer LED light will indicate the
selected length of operation.
x Every time the Timer button is pressed
the Timer LED light will cycle through the
settings. (
1hr, 4hr, 8hr, [NO TIMER])
▶ The WINIX SMART app will display how much time is remaining
5. PlasmaWave®
By default, PlasmaWave® is enabled whenever the unit
is powered on.
Press the Plasma button when the power is
①
on to enable or disable this feature.
English
automatically disabled.
on the timer.
Operating the air cleaner
.
| Operation
HR 1000
11