Changing The Timer Program - Honeywell HR 40 Montage- Und Bedienungsanleitung

Changing the timer program

You can specify 2 comfort and 2 economy periods for each day of the week.
In the timer program Monday to Sunday are numbered from 1 to 7.
Note: Each heating period must always have a corresponding economy
period assigned to it (see also the operating example).
1. Press the
PROG
2. Set all days identically:
With the handwheel select
or
Select an individual day:
With the handwheel select the day in question.
3. Press the
PROG
4. With the handwheel set the time when the first economy period should
start.
5. Press the
PROG
6. Repeat steps 4-5 to set the first economy period.
For the second heating and economy periods: Repeat steps 4-6.
Set the times for another day of the week: Repeat steps 2-6.
7. Press the
AUTO
MANU
The new times have now been programmed in.
button.
.
button to confirm.
button to confirm.
button to terminate this procedure.
25