Specifications - DJI DATALINK PRO Kurzanleitung

Solid Blue
—
Blinking Blue
......
and Purple
Alternately
Blinking Red
......
and Green
Alternately
......
Blinking Purple
......
Blinking Yellow
Blinking Yellow
Twice
Quickly Blinking
......
Green
......
Blinking Red

Specifications

Type
Performance
Transmission Power
Power Consumption
Features
Frequency Band (MHz)
Serial Data Rate
Antenna Options
Supported Interfaces
Supported Max. Mobile
Station Number
Supported DJI Products A3, D-RTK, Ground Station
Operating Temperature
Storage Temperature
Humidity
Dimension
(without Antenna)
Base Station: Working in Broadcast Mode.
Mobile Station: Working in Broadcast Mode
and receiving the data from Base Station.
Working in Ground Station Mode.
Linking in progress.
Connected to the Assistant successfully.
Upgrading or preparing for upgrade.
4-position switch is toggled successfully.
Current system setting is saved (Run mode
changed successfully), or connected device
information is clear.
Parameter error after powering on. If not
resolved by power cycling, contact your
dealer.
DATALINK PRO 400
Mainland China:
10dBm
Taiwan, China:
10dBm
South Korea:
10dBm
Base Station:
2.1 W
Mobile Station:
0.65 W
Mainland China:
430-432
Taiwan, China:
429.175-429.2375
South Korea:
447.8625-447.9875
115200 bps
Vertically polarized
USB, UART, CAN
Full Duplex Mode: 1
Broadcast Mode: 32
Ground Station Mode: Up to 5*
32° to 113°F (0° to 45°C)
-40° to 185°F (-40° to 85°C)
5% to 95%, non-condensing
Base Station:
82.9 mm × 51 mm × 14.35 mm
Mobile Station:
57.8 mm × 42.3 mm × 9.35 mm
© 2016 DJI All Rights Reserved.
DATALINK PRO 900
CE: 13dBm
FCC: 27dBm
Canada: 27dBm
Australia: 27dBm
Japan: 10dBm
Base Station:
1.2 W
Mobile Station:
0.65 W
CE: 869.525
FCC: 903-925.5
Canada: 903-925.5
Australia: 916.5-925.5
Japan: 923.1-926.3
7