PERFECTPRO BLUEPOCKET Bedienungsanleitung Seite 17

When the alarm sounds: The Alarm icon will flash at the
Standby mode display when an alarm is sounding. Press
the Power button to cancel the sounding alarm. If buttons
other than Power button are pressed, it will put the alarm to
snooze and silence the alarm for 5 minutes. A snooze icon
will flash on the display when the alarm is put to snooze
mode.
Note: Your setting alarms will sound even the Bluepocket is
in use or while the music is playing. The moment the alarm
starts, the Bluepocket goes into Standby mode.
● Contrast: the contrast of the display can be adjusted.
Press the Previous/next button to adjust the contrast. The
contrast level indication on the screen will change at the
same time. When you find the setting that gives the best
legibility for the location in which the device is used, press
the Select button to save the setting.
● Language: your Bluepocket can be configured to a different
language.
Press the Previous/next button until your required language
is highlighted on the display. Press the Select button to
confirm your choice.
● Factory reset: by performing a factory reset, all user
entered settings will be erased.
Press the Previous/next button to select YES or NO. Select
YES to erase all saved settings and all settings will revert to
factory default.
6