Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
D) System:
press the Select button to select from the following settings
● Time/Date
Set Time/Date
1) Press the Previous/next button until 'Set Time/Date' is
highlighted. Then press the Select button to enter the time
setup. The day digits will flash.
2) Press the Previous/next button to select correct day. Press
the Select button to confirm the setting. The month digits
will flash.
3) Follow the same procedure above for the month/year/hour/
minute setting.
Note: In Standby mode, if no operation for 0 seconds, both
the screen and backlight will be turned off to minimize power
consumption.
However, when any buttons (other than the Power button) is
pressed in Standby mode, the display will light up again and
show the clock (and alarm) information for 10 seconds.
Set format: The clock display can be set to or 4 hour
format.
1) Press the Previous/next button until 'Set Format' is highlighted
on the display. Press the Select button to enter the clock
format menu.
2) Press the Previous/next button to select either 12 or 24
format. Press the Select button to confirm your choice.
Set alarm: Your Bluepocket has separate alarms which
can be set to wake you up.
4
Werbung
Inhaltsverzeichnis
