CAUTION!
Do not drill or solder the
wire ends. This is strictly
forbidden!
CAUTION!
Do not connect the cable
without cable end sleeve.
Two-phase connection
1. Remove the cable end sleeve from
black and brown wires.
230V~
N
L
One-phase connection - 230 V~
N
L
8.4 Assembly
min.
500mm
Green - yellow
Blue and blue
Black and brown
min.
50mm
min.
2mm
2. Remove an insulation of the brown
and black cable ends.
3. Apply a new wire end sleeve of 1.5
mm² on each cable end. (special tool
required).
Cable cross section
400V 2~N
Two-phase connection - 400 V 2 ~ N
Green - yellow
Blue and blue
Black
Brown
ENGLISH
19
N
L1
L2
N
L1
L2